back to home
 
 
 
kit 1998-05 FORD RANGER 2.5" PERFORMANCE SYSTEM
By designing new upper control arms, upper bumpstop mounts and coil springs, we are able to obtain 2.5" of lift with a 2" increase in wheel travel. Available with or without preinstalled ball joints.

98-05 Ford Ranger  2.5” Performance System Coil Front Suspension

If you are looking for a mild lift system for your Ford Ranger, then look no further.  We have designed new upper control arms, upper bump stops mounts, and coil springs designed just for the motor that is in your truck for great on and off road ride.  Completing the system is front and rear Performance Shocks and a rear add-a-leaf. By doing this you are able to obtain 2.5” of lift with an increase in wheel travel of  2”.  Upper control arms available with or without ball joints preinstalled.  Take your Ranger to the next level with a Fabtech Suspension System.

98-05 Ford ranger 5.5” Ultimate System Coil Front Suspension

Looking for the ultimate system for your Ford Ranger?  Well here it is. Take our proven 2.5” upper control arm coil performance kit and ad our one piece cast design 3” spindle.  With the combination of upper control arms, bump stop mounts, coil springs designed just for the motor you have, front and rear Performance Shocks rear block and add-a-leaf, you will achieve 5.5” of lift and the room to run a 32/11.50R15 tires on a 15x7 wheel. Your Ranger will rise above the rest with Fabtech’s Ultimate Suspension System.

Ford Ranger 1998-2006 2WD Coil Spring Front Suspension
3" Spindle System(30)

Use 31/10.50R15 tires w/15x7 wheels w/ 3 3/4" BS w/minor trimming

1 FTS98100-7 3" Lift Spindles **1998-2000**(9) FT98100-7I
1 FTS98200-7 3" Lift Spindles(9) FT98200-7I
Use One of the Above Lift Spindles
2 FTS7078 Performance Front Shocks  
2 FTS7265 Performance Rear Shocks  
1 FTS202 2" Rear Add Leaf FTAALI
1 FTS291 Alignment Cam & Bolt Kit FT290I
 
2.5" Performance System(30)
Use 31/10.50R15 tires w/15x7 wheels w/ 3 3/4" BS w/minor trimming
1 FTS98100-2 2.5" Lift Coil Springs*4 Cyl/3.0/V6* FT98100-2I
1 FTS98100-3 2.5" Lift Coil Springs **V6 4.0** FT98100-3I
Use One of the Above Coil Springs
1 FTS98100-6BJ Ranger Upper Control Arms **w/ Pre-installed Ball Joints** FT98100-6BJI
2 FTS9119 Performance Front Shocks  
2 FTS7265 Performance Rear Shocks  
1 FTS202 2" Rear Add Leaf FTAALI
1 FTS291 Alignment Cam & Bolt Kit FT290I
 
5.5" Ultimate System(30)
Use 32/11.50R15 tires w/15x7 wheels w/ 3 3/4" BS w/ minor trimming
1 FTS98100-2 2.5" Lift Coil Springs **4 Cyl/3.0/V6** FT98100-2I
1 FTS98100-3 2.5" Lift Coil Springs **V6 4.0** FT98100-3I
Use One of the Above Coil Springs
1 FTS98100-6BJ Ranger Upper Control Arms *w/Pre Installed Ball Joints* FT98100-6BJI
2 FTS98100-7 3" Lift Spindles*98-00*(9)  
1 FTS98200-7 3" Lift Spindles*01-06*(9)  
Use One of the Above Lift Spindles
2 FTS9119 Performance Front Shocks  
2 FTS7333 Performance Rear Shocks  
1 FTSBK2 2" Rear Block Kit FTBK1
1 FTS725 Rear U-Bolt Kit  
1 FTS202 2" Rear Add A Leaf FTAALI
1 FTS291 Alignment Cam & Bolt Kit FT290I
 
2001-2005 Ford Ranger Edge 2WD/2006 Ford Ranger Sport 2WDTorsion Bar Front Suspension
3" Spindle System(30)(32)

Use 31/10.50R15 tires w/15x7 wheels w/ 3 3/4" BS w/minor trimming

1 FTS98300-7 3" Lift Spindles(32) FT98300-7I
2 FTS9330 Performance Front Shocks  
2 FTS7333 Performance Rear Shocks  
1 FTS202 2" Rear Add A Leaf FTAALI
1 FTS291 Alignment Cam & Bolt Kit FT290I
 
Footnotes
9 2000-06 Models w/10.25" rotor use FTS98100-7, Models w/11.25" rotor use FTS98200-7.
30 Larger tires cannot be installed on OEM wheels. Aftermarket wheels with a maximum backspacing of 3 3/4" must be used.
32 May experience minimum loss of turning radius.
 
beauty
98-06 FORD RANGER
• 5.5” ULTIMATE SYSTEM
• 32/11.50R15 TIRES 15X7 WHEELS W/3 3/4” BACK SPACING
01-06 FORD RANGER EDGE
• 3” SPINDLE SYSTEM
• 32/11.50R15 TIRES 15X7 WHEELS W/3 3/4” BACK SPACING
 
  For comments about our site. Email us: Webmaster
©2006 Fabtech Performance Suspensions
back to top