Fabtech is releasing their 6" Dodge 2500/3500 4WD System with Dirt Logic 4.0 Coilover Conversion. This coilover conversion is available as a complete system or as an upgrade to a previously installed Fabtech 6" System.

The Coilover Conversion features our Dirt Logic 4.0 for maximum suspension dampening in rugged offroad conditions. The conversion system does not require elimination of the factory coil spring bucket and is a 100% bolt on installation.
The vehicle specific Dirt Logic 4.0 Coilovers feature a 4” OD remote reservoir connected via -10 hose assembly and includes large billet reservoir clamps and limiting straps. As an upgrade to the Coilover Conversion we also offer an optional front Dirt Logic Hydraulic Bumps Stop system that aids in compression dampening for severe offroad driving.

This system includes Trac Bar bracketry, Pitman Arm, Sway bar mounts, Bump Stops, and a transmission mount with rear lift coming from a Block and U bolt system.

  
         
     
         
 

FEATURES AND BENEFITS

  • Coilover Conversion Only - add increased performance and maximun suspension dampening by upgrading a previously installed Fabtech 6" System.

  • 100% Bolt on.

  • 6" Performance System w/4.0 Coilover Conversion
    - Complete system available with Performance or
    Dirt Logic rear shocks.

  • Does not require elimination of factory coil
    spring bucket.

  • Transmission drop bracket improves the front and rear drive line angles by lowering the transmission.
  

INSTALLATION & TECH

  • 6-8 hours ( Coilover Conversion Only)

  • 8-10 hours (6" Performance System w/Coilover)

  • Complete installation instructions available on the web at: www.fabtechmotorsports.com

TIRE AND WHEEL SIZE

Use 37/12.50R17 tires w/17x9 wheels w/ 5” BS

  
         
   
 
4331 Eucalyptus Ave. Chino, CA 91710 P: 909.597.7800 F: 909.597.7185
 
  NPR08014